How Do You Hang Lights In A Backyard Globe?

There’s nothing better than getting ready for Christmas by decorating your home with string lights. You can hang them on the tree, in the windows, or anywhere else that needs some festive lighting.

But if you’re new to this tradition, it can be a challenge finding out how to hang those strings of light so they’ll look good and stay put. Here are some ideas for how to get started:

How to Hang Outdoor String Lights | The Home Depot

Takeaways
Hanging outdoor string lights can add ambiance and style to your backyard space.
There are many ways to hang outdoor string lights, including attaching lights to trees or fence posts, using poles or DIY posts, or hanging lights using guide wires.
Consider factors such as brightness, energy efficiency, and durability when selecting the best type of outdoor string lights for your backyard space.
You can create a beautiful backyard lighting design by combining different types of outdoor lights, such as string lights, lanterns, and spotlights.
Take down outdoor string lights during extreme weather conditions to protect them and prolong their lifespan.

Hang Your Lights With Fishing Line

To hang the lights in your backyard globe, you will need to attach fishing line to a hook. This can be done using a hook and then attaching it to another hook or by simply attaching the fishing line directly to one of the hooks.

Privacy is key when it comes to creating a cozy backyard space. If you’re looking to hang lights in your backyard globe, consider incorporating some privacy elements. Our guide on creating a small backyard private provides helpful tips and ideas on how to create a peaceful and secluded backyard space.

Use Thumbtacks To Hang Twinkle Lights

Now that you have your lights in hand, it’s time to hang them. You’ll want to start by finding the center of the globe and marking it with a piece of painter’s tape.

Once you find the center, use a hammer and thumbtacks to hang your lights. To do this, tap each thumb tack into place at least 6 inches apart (but no more than 12 inches apart). Place a level on top of one side of the globe and move it around until all four sides are even.

Once everything is level, remove the painter’s tape from around your mark across from one side of the globe this will be where you begin gluing down your twinkle lights using hot glue gun sticks or other adhesive materials such as clear double-sided tape or painter’s caulk (if hanging multiple strands).

If necessary, place another piece of painter’s tape along any point along this line before continuing with adhesive application so that none gets on areas not meant for adhesion purposes only.

Hide The Lines Using A Wood Branch

You can also use a sturdy branch to hide the lines, but be sure it is strong enough to hold the weight of your lights.

You don’t want your lights falling down in the middle of an important party! If you are using a wood branch, make sure that it will not be damaged by being covered in lights (like pine trees), or by having water drip on them (like cedar).

Also consider how much room you have for hiding wires under a branch. A thick branch might take up too much space if you want to put other decorations around it as well.

A backyard greenhouse can be a beautiful and functional addition to your backyard space. If you’re interested in growing plants and flowers to complement your backyard lighting setup, check out our guide on how much a backyard greenhouse costs. Our guide breaks down the costs and benefits of different greenhouse options, so you can choose the best one for your needs.

Use Nails To Hang Lights On The Ceiling

Now that you’ve attached the main part of your globe, how do you hang lights in a back yard globe? There are two ways to accomplish this:

Nail them. Use a hammer and nails to attach the lights to the ceiling. Make sure that they’re straight by using a level as well as making holes for them with a drill first so that they don’t damage any surfaces below.

Hire an electrician or find someone who knows how to work with electricity well enough that they can safely install the light bulb sockets where needed on both sides of each socket before hanging it from above so that no one touches anything while working on hanging it up there without being injured due to poor planning ahead time wise (plus get paid for their time spent doing it).

Hang Your Lights From A Clothesline

If you want to hang lights outside, the easiest way to do it is with a clothesline. The line will act as a great conduit for your string of lights and make hanging them much easier than if you were simply trying to tie each bulb on with twine (or whatever).

To hang lights from a clothesline:

Find an area for your clothesline that gets plenty of sun throughout the day. You’ll want this space to dry quickly in case it rains or snows overnight it’s no fun waking up to wet laundry!

If you’re planning a special event in your backyard, don’t forget to add some decorative flair to your gazebo. Hanging lights in a backyard globe is just one way to add some ambiance to your outdoor space. Check out our guide on decorating a gazebo for a wedding for some great ideas and inspiration.

Weave The Lights Around A Hanging Planter

A hanging planter is a great way to display string lights, especially if you have a plant stand with tiers. The planter will allow you to show off your lights from all angles and will give the impression that they’re floating in mid-air.

You can also hang twinkling lights from the ceiling, or create a hanging lantern by weaving them through an old frame or chandelier lampshade.

Use Tape Or Glue To Hold The Lights In Place

You can also use tape or glue to hold the lights in place. This is especially useful for hanging lights on surfaces like trees and plants as well as other objects you may want to decorate with lights.

Tape: One option is to use double-sided tape, which you can find at most hardware stores, along with a pair of scissors and some string or wire (if needed).

To do this, cut the string into two equal pieces and tie each piece around one end of your set of lights. Now take one side of your double-sided tape and press it firmly against an area where your light strand will attach to whatever surface you are attaching it too (such as a tree branch).

A strong wind can quickly ruin your backyard lighting setup if you’re not prepared. That’s why it’s important to secure your gazebo from wind before hanging lights in your backyard globe. Check out our guide on how to secure a gazebo from wind to learn some tips and tricks for keeping your outdoor lighting safe and secure.

Attach Your Strings Of Light With Wire Or Thread

Attach your strings of light with wire or thread. If you are hanging lights on a globe, you will want to use one of three methods.

The first is to attach your lights with fishing line. This can be done by tying the fishing line through the hole that holds the string in place and then tying it around each bulb until every bulb has a piece of fishing line attached to it.

A second method is to use wire, which is probably easier than using fishing line because you don’t have to worry about getting knots out later on if you need to remove them (which might be necessary depending on where they’re hung).

Threading needle and thread through each bulb gives an added bit of stability compared with other options mentioned above while also allowing for removal later if necessary!

To make sure that no matter how many bulbs there are there will always be enough room between each one so that nothing catches fire when heated up from electricity running through them!

Hang Your Lights Using Magnets

Hanging your lights from a globe is a great way to add some sparkle to your yard and make it feel like the holidays. But setting up a display isn’t as simple as just throwing them on top of the globe.

Here are some tips for hanging them safely and securely, so you can enjoy them all season long.

Use metal lamp bases for hanging lights. This will help keep things stable and prevent damage from strong winds if you live in an area prone to storms during winter months such as hurricanes or tornados.

If you don’t have any spare lamps lying around, look at thrift stores or garage sales for inexpensive replacements that work well with this type of setup!

Use large magnets instead of hooks, chains, etc... You want all those pretty little bulbs to stay put where they belong (and not end up on someone’s head while they’re walking through the backyard), so make sure they’re securely adhered together before putting any weight on top–especially if there’s potential risk involved (like children playing nearby).

A good rule-of-thumb: If something looks like it would hurt if hit by falling debris then chances are good that it’ll cause harm if used improperly here too!

Proper maintenance is essential to keep your backyard gazebo looking beautiful and functioning properly. If you’re investing in a backyard gazebo, it’s important to know how to maintain it. Check out our guide on tips for maintaining and keeping your gazebo in good condition for some helpful advice on how to care for your outdoor structure.

Change Up Your Lighting With Different Shades Of Bulbs

You can also change up the look of your lights by changing out the bulbs. You have a lot of options, from clear bulbs for a softer glow to colored bulbs for a more festive look. Or you can choose LED lights that are more energy efficient and last longer than incandescent light bulbs.

Use A Hanging Plant Stand To Display String Lighting

You can display string lighting in a hanging plant stand. A planter makes an attractive way to display your lights.

This is especially true if you have an empty wall or corner in which to hang them, such as next to the entrance of your backyard home.

Conclusion

Once you’ve selected your method of hanging, it’s time to get started. The key is to make sure that you have enough lights and stringing material so that none of the bulbs are exposed.

If they are, then they could burn out quickly or even cause a fire! It’s also important not to wrap around any other wires or cables because this could cause damage as well.

FAQs

What is the best way to hang outdoor string lights?

The best way to hang outdoor string lights depends on your backyard space and personal preferences. However, some popular methods include attaching lights to trees or fence posts, using poles or DIY posts, or hanging lights using guide wires.

How do I choose the right type of outdoor string lights?

There are many types of outdoor string lights to choose from, including incandescent, LED, and solar-powered options. Consider factors such as brightness, energy efficiency, and durability when selecting the best type of lights for your backyard space.

Can outdoor string lights be left outside all year?

Outdoor string lights are designed to withstand the elements, but it’s a good idea to take them down during extreme weather conditions such as heavy rain or snow. You can also invest in weather-resistant string lights for added durability.

How many outdoor string lights do I need for my backyard?

The number of outdoor string lights you need for your backyard depends on the size of your space and the look you’re trying to achieve. As a general rule, you’ll need about one strand of lights for every 10-12 feet of space.

How do I install outdoor string lights without drilling holes?

If you don’t want to drill holes in your backyard space to install outdoor string lights, there are a few alternative methods. You can use adhesive hooks or clips to attach lights to walls or other surfaces, or invest in freestanding poles or DIY posts to hang lights without drilling.

Hellen James

I am Hellen James, a landscape architect. For many years I have written about landscaping for various publications; however, recently decided to focus my writing on personal experience as a profession.